mysqli_sql_exception: Unknown column 'print' in 'where clause'

Article  915:  Definitions

1.  For  purposes  of  this  Chapter:

Approval  procedure  means  any  registration,  notification  or  other  mandatory  administrative  procedure  for  granting  permission  for  a  good  or  service  to  be  produced,  marketed  or  used  for  a  stated  purpose  or  under  stated  conditions;

Assessment  of  risk  means  evaluation  of  the  potential  for  adverse  effects

Conformity  assessment  procedure  means  any  procedure  used,  directly  or  indirectly,  to  determine  that  a  technical  regulation  or  standard  is  fulfilled,  including  sampling,  testing,  inspection,  evaluation,  verification,  monitoring,  auditing,  assurance  of  conformity,  accreditation,  registration  or  approval  used  for  such  a  purpose,  but  does  not  mean  an  approval  procedure;

International  standard  means  a  standards-related  measure,  or  other  guide  or  recommendation,  adopted  by  an  international  standardizing  body  and  made  available  to  the  public;

International  standardizing  body  means  a  standardizing  body  whose  membership  is  open  to  the  relevant  bodies  of  at  least  all  the  parties  to  the  GATT  Agreement  on  Technical  Barriers  to  Trade,  including  the  International  Organization  for  Standardization  (ISO),  the  International  Electrotechnical  Commission  (IEC),  Codex  Alimentarius  Commission,  the  World  Health  Organization  (WHO),  the  Food  and  Agriculture  Organization  (FAO),  the  International  Telecommunication  Union  (ITU);  or  any  other  body  that  the  Parties  designate;

Land  transportation  service  means  a  transportation  service  provided  by  means  of  motor  carrier  or  rail;

Legitimate  objective  includes  an  objective  such  as:

Considering,  among  other  things,  where  appropriate,  fundamental  climatic  or  other  geographical  factors,  technological  or  infrastructural  factors,  or  scientific  justification  but  does  not  include  the  protection  of  domestic  production;  

Make  compatible  means  bring  different  standards-related  measures  of  the  same  scope  approved  by  different  standardizing  bodies  to  a  level  such  that  they  are  either  identical,  equivalent  or  have  the  effect  of  permitting  goods  or  services  to  be  used  in  place  of  one  another  or  fulfill  the  same  purpose;

Services  means  land  transportation  services  and  telecommunications  services;

Standard  means  a  document,  approved  by  a  recognized  body,  that  provides,  for  common  and  repeated  use,  rules,  guidelines  or  characteristics  for  goods  or  related  processes  and  production  methods,  or  for  services  or  related  operating  methods,  with  which  compliance  is  not  mandatory.  It  may  also  include  or  deal  exclusively  with  terminology,  symbols,  packaging,  marking  or  labelling  requirements  as  they  apply  to  a  good,  process,  or  production  or  operating  method;

Standardizing  body  means  a  body  having  recognized  activities  in  standardization;

Standards-related  measure  means  a  standard,  technical  regulation  or  conformity  assessment  procedure;

Technical  regulation  means  a  document  which  lays  down  goods  characteristics  or  their  related  processes  and  production  methods,  or  services  characteristics  or  their  related  operating  methods,  including  the  applicable  administrative  provisions,  with  which  compliance  is  mandatory.  It  may  also  include  or  deal  exclusively  with  terminology,  symbols,  packaging,  marking  or  labelling  requirements  as  they  apply  to  a  good,  process,  or  production  or  operating  method;  and

Telecommunications  service  means  a  service  provided  by  means  of  the  transmission  and  reception  of  signals  by  any  electromagnetic  means,  but  does  not  mean  the  cable,  broadcast  or  other  electromagnetic  distribution  of  radio  or  television  programming  to  the  public  generally.

2.  Except  as  they  are  otherwise  defined  in  this  Agreement,  other  terms  in  this  Chapter  shall  be  interpreted  in  accordance  with  their  ordinary  meaning  in  context  and  in  the  light  of  the  objectives  of  this  Agreement,  and  where  appropriate  by  reference  to  the  terms  presented  in  the  sixth  edition  of  the  ISO/IEC  Guide  2:  1991,  General  Terms  and  Their  Definitions  Concerning  Standardization  and  Related  Activities.